Status Schietty

Large concessions in the main racial characteristics

Highest demands must be placed to all major racial characteristics. Place great weight on satiated lacquer-rich color with much green gloss, and no deviation in the color of primaries. Further faults are too bright and too rough cere, loose neck plumage and split/swirl in plumage in cheek/neck area. In this stage of breeding have attention on straighten primaries.

Observable are prima figures, tripartition and head points. The requirements in color are a pure pigeon-blue with most dark primaries. The 0.1 are sex-linked darker in body color. Too cloudy or approach of lacing on the shield is a fault. Pigeon with brownish primaries can no more reach sg (93 points). The unsightly split/swirl in plumage in cheek/neck area should downgrade in the judgment. Furthermore, have somewhat more attention of the size of figure and leg thickness.

New color impact, in which even the highest requirements on figure head points and stand length, can be placed. They show the dense form of checkering. Here the shield feather tip only has an arrow point or lacing. Consequently, too much body color (blue) in the shield is here a fault.

Figurative they should catch up with the other checker. Only drawing color should appear on the shield and the shield color should therefore appear even dark.

Show prima body fullness, stand height and head points. The mould should be evenly distributed over the entire body. The ideal mold color looks like a coating with frosty blue. In the neck feathers the basic part and the points of the feather are bright, the middle part is blue. Bars and tail bar are black. Primaries are as dark as possible. Faulty are bar rust, missing neck mould, large areas with white feathers, reeds in primaries visible from the outside.

Appealing in the form and stand height. There are still critical points to the head form and neck elegance. The bar color is the “eye catcher”. There are required a chestnut brown and pure color and shall at the end have a black lacing. Therefore too clayey bar color scales back to grade g (90 – 91 points). There is to be aimed for a smooth bar guidance. Look out for a dark and delicate eye cere.

Figurative equated with the breeding partner Blue with Bronze Bars. In the mould drawing it is equal the Blue Grizzle with Black Bars . The bars are bronzed and close with a dark seam. Faulty are very impure bar- and breast color and too light primary color.

Prima short and round figures, appealing stand height and beautiful head points. What is desired is a bright even yellow color. Primary and tail color should not settle. Outer tail feathers colored through. In this color impact often problems to soft resp. hairy bar feathers, as well as the loose neck feather. There must be worked on a more intense eye color. Again, attention should be paid on the size as the neck nobility.

Are prima in body rounding and stand height as well as in the heads. Still to take care of the neck nobility with fixed neck plumage. For an assessment of the sg it is essential of a colourful orange-red eye surrounded by a delicate, unobtrusive and bright cere.

Are present in a few breeds and quite good in stand height and neck length. Should however be shorter and rounder in the body and also more round in the heads. In color there are hardly any failures. There has yet to be worked on the bar guidance and separation.

Show pretty stylish figures, good head form and great eye color. Body and color of primaries should be as dark as possible. Incorrect therefore is too blue belly or thigh color. Bronze deposits in primary are color reserves, finch drawing is regarded as special ornament, and limited color deposits in the flanks are to be tolerated. The shield color must be fawn brown and must not be too bright. Furthermore, the shield must be pure, that is, without approach of lacing. Add weight on fixed bar feathers.

Bronze Laced (o)

They show quite good breast width and rounding, but should still be shorter in the back. Also still work to do at stand height and neck nobility. Look out for a dark body color, also in the belly and thigh. The shield color is chestnut brown and must not be too light or clayey. Have attention on broad shield feathers surrounded of a dark lacing. A blue lacing at the tip of the shield feathers is a fault.

Rarely shown color impact with some breeding difficulties. They also show quite good figures. Breeding focus should lie on more head rounding and shorter beaks. Lacquer black body color is available. To work for more pure white shield color with an enclosing lacing. Brightened outer tail feather or visible tail bar are faulty.

Have the most widely prevalence among the white shielded and show very good figures. The upper head rounding, beak length and graded neck finish should be improved. The body color is required dark (blue-black), including legs and flanks. The tail feathers are bluish with distinct tail bar. The shield color so white as possible, not too creamy and free of pepper or rust. Most attention on a broad shield feather surrounded of a dark lacing.

Shows a pretty good figure and stand height, but should yet increase in the length of neck and head points. To look out for a pure beak color - in an intense color, a lighter approach can be tolerated. A desire to a pure and intense body color from head to tail, the primaries should show most of coloring. The shield color should be more pure with a correcter lacing.

Approved in 2010, but this color impact has not quite taken hold. But i.a. through the connection to the Black Schietti corresponding demands is made on the form and stand height. They have a light gray body color; head and upper neck are darker. Shield and primaries are with dark lacing.

The ice color is quite well. The tail bar should be black, separated and clear. But there is still much room for improvement in type, stand height and body. The heads must be more racial topic.

As aforementioned good in the ice color. The bars are black, tail bar black and clear delineated. The heads and beaks have to be more typically. Because of the years after the approval they should not so clearly show the in crossing of Damascener and Ice Colored Italian Owl. To obtain required three-points partition they have to be improved in stand height and shortness of body. Approach of jabot and dewlaps  can not be tolerated.

Faulty: Missing stand height, insufficient body depth, too long neck, angular head.

Good figures, matching stand height and neck length are present. Also, they should be more elegant in type. With respect to color the same applies as at the foregoing. Attention must be paid to dark bars without rust deposits.

Figurative and color, they are quite well positioned, but are occasionally seen in coarse types. Of great importance is an evenly checker design, not too full and not too open, and without rust deposits.

Newly added color impact, has not yet been shown on the main special exhibitions. Figurative and color the same applies as for the Silver Checker. The body color should be ousted on the shield so far that only an arrow point drawing or even a form of lacing can be seen. Everything else can not be valid as dark checker.

Very rarely shown color impact, should therefore be assessed indulgently. Yet pretty good figures already exist. In color analogous to the foregoing they should show ochre bars that have a dark lacing. The chest color will not be as pure to achieve as in the other blue pale ones.

The barless variant of Russet is quite rare to see. There should be been working towards more elegant types with matching stand height and slim, smooth neck. The shield should show a bright evenly gray-brown. Head, tail and wedge are darker; with tail bar. Primaries as possible gray brown colored. The eye color should not brighten too much up.

Occurrence in small collections. They should as the foregoing be more elegant. An evenly shield color should be required. The bar color should be reddish brown and finish with a dark brown lacing. The tail bar must be clearly delineated. The orange-red eye color should also be wanted here.

Like their barred relatives they are found in rather small collections. Also here needs to be worked on more stand height and neck nobility. In terms of color the same applies as with the foregoing. The color of the checker is reddish brown with enclosed dark brown lacing. To provide space to a sufficient drawing it’s placing emphasis on broad shield feather.

Newly approved color impact (2013), however, existed for some time as a breeding partner of Russet Dun Grizzle with Brown Bars. They show prima short and rounded figures. The heads are very good. In terms of color they are desired as the bronze barred variant. They differ only in the bar color; this is required brown and without lacing.

This color impact is represented in strong collections and they fascinate with short forms, good standing height and attractive head points. Further on there must be worked on a pure shield color, and may not act too loamy. Head and bar color should match. Too bright head color is therefore a fault, as too blue head or shield color. Have attention on color reserves in the insides of the primaries. Faulty are furthermore different color splashes/stipper in tail and wings.

New color impact, figuratively equate the two foregoing. Focus here is on the shield. Only drawing color should be recognizable. Any brightening or lacing is unwanted. Primaries and tail are brightened. Faulty are differently colored splashes/stipper in tail and primary.

Ash Red Grizzle with Red Bars (-)

Figurative they are attractive, even in the head points. An evenly grizzle drawing over the body must be required. Head, neck and bars are intense red coated with mold. Primary and tail feathers act by the mold almost white.

Figurative as fore mentioned with the dark form of checkering. Fault as fore mentioned.

Similar to the Dominant Red this new color impact should show an evenly colored shield without brightening. Figurative the goal is the expectations of the Yellow Checker. Faulty are differently colored splashes/stipper in tail and primary.

High demands can be made on figure, standing height and head points. With an intense black body color the white teager drawing should be evenly distributed over the entire body. In any event breast and shields should be drawn. Tail and primaries must be black. Therefore it is a fault if there are white feathers in tail or primaries/secondary’s, as well as reed, too little teager drawing, red or rough eye ceres. Pay attention to the purity of color.

Like the Black Teager, but with white feathers in primaries and tail. Per missing white feather in primaries/tail it results in a deduction of one point. In color it appears brighter than the Black Teager. With increasing age, they become brighter, however large monochrome feather areas are not wanted here. Again, pay attention to color purity, i.e. the primaries/tail feathers should be either white or black; – points must be deducted when feathers here are two-colored.

Shows an appealing figure and posture. Should be more elegant in the neck, i.e. more stretched and slim. The body color is a pure blue, with no approach of bar, and with an evenly distributed teager drawing all over the entire body. Somewhat carbon (pepper) storages in the bar area has to be tolerated.

Figurative like Blue Teager. The main impression of the drawing image is clean blue feathers regularly as possible distributed in a white body color. As much as possible also mottled in primaries and tail. Mottle formed by blue colored flecks/splashes in the feathers is faulty.